Single Girder Cranes

SKYLINE SINGLE GIRDER OVERHEAD EOT CRANES feature maximum rigidity for a minimum dead weight. This keeps the load on the crane runway low and a cost-effective design can be selected for the building. They also offer the benefits of outstanding crane
geometry, resulting in exceptional travel characteristics enabling the crane to meet your requirements for higher efficiency.

Benefits & Features:

Plate box section as the crane girder
End carriages of welded box girder construction
Connections between the main girder and end carriages manufactured to mechanical engineering tolerances for minimum wear and tear.
Low-headroom design with wire rope hoist, offering particularly favorable hook approach dimensions to serve the largest possible area
Control pendant suspended for separate travel on the crane girder
Paint finish in semi-matt golden yellow and travel drives in silver grey

Technical Specifications:

Safe working load	1 Ton to 10 Tons
Span	4m to 35 m
Class of Duty/Standards	Equivalent to M5 and M7 as per IS: 3177/IS: 807 classification. Hoists are as per IS: 3938 classification
Speeds	Selected depending on client specifications/ applications
Crane Control	From the floor through pendant push buttons. Optionally through radio remote control
Drive System	Twin drive through squirrel cage induction motors with single self lubricated helical gear boxes with fail safe brakes
Motors	Squirrel cage induction hoisting motors for hoisting, cross travel and long travel. Insulation class F, degree of protection IP55, ambient temperature 45 C, 150 starts/ stops per hour, duty S4, CDF 40%, conforms to IS:325
Brakes	Electro hydraulic thrusters/disc brakes for all motions. DC/AC electromagnetic brakes or additional brakes can be provided on request.
Power Supply System	To hoist and cross travel through trailing cables/drag chains. To crane through shrouded busbars/trailing cable/MS angle bus bar/bare copper conductors (depending on customer’s choice and application)