SINGLE GIRDER CRANES

SINGLE GIRDER CRANES feature maximum rigidity for a minimum dead weight.  This keeps the load on the crane runway low and a cost-effective design can be selected for the building.  They also offer the benefits of outstanding crane geometry, resulting in exceptional travel characteristics enabling the crane to meet your requirements for higher efficiency.

Benefits & Features:

  • Plate box section as the crane girder
  • End carriages of welded box girder construction
  • Connections between the main girder and end carriages manufactured to mechanical engineering tolerances for minimum wear and tear.
  • Low-headroom design with wire rope hoist, offering particularly favorable hook approach dimensions to serve the largest possible area
  • Control pendant suspended for separate travel on the crane girder
  • Paint finish in semi-matt golden yellow and travel drives in silver grey

Technical Specifications:

SWL 250 Kgs. to 15 Tons
Span 4m to 30m
Heights of Lift As per Customer Applications
Class of Duty/Standards Equivalent to M5 and M7 as per IS: 3177/IS: 807 Classification. SKYLINE hoists is as per IS: 3938 standards
Speeds Selected depending on client specifications / applications / dimensions
Crane Control From floor through Pendant Push Buttons. Optionally through Radio Remote Control
Drive System Twin Drive through Squirrel Cage Induction Motors with tingle self lubricated Helical Gear Boxes with Fail Safe Brakes
Motors Squirrel Cage Induction Hoisting Motors for Hoisting, Cross Travel as well as Long Travel. Insulation all motors ‘F’ Class with 40% CDF S4 Duty
Brakes Electro Hydraulic Thrusters / Disc Brakes for all motions. DC/AC Electro Magnetic Brakes or additional brakes can be on request.
Power Supply System To Hoist and Cross Travel through Trailing Cables/Drag. To Crane through
Shrouded Bus Bars/Trailing Cable MS Iron Conductors/Bare Copper Conductors (depending on customer’s choice and application)

TYPE-1

TYPE-2

TYPE-3

TYPE-4

Optimum adaptation to the building design